WVL-T24

Description:

VERTICAL WHEEL MACHINE CENTER TO ACHIEVE THE DIVERSE NEEDS OF THE WHEELS MARKET

WVL-T24 Specification and Features

ALL-SIZE PROCESSING CAPACITY This machine works with all wheel sizes max, diameter 26”.and max. height14″,
• Occupy floor space is relatively small among the similar model That brings convenience for production line arrangement. • Light integrated machine bed structure design, with high rigidity. • Patented spindle structure design The height of working table is much lower than the other similar model on the market. This brings the convenient to the operator for loading and unloading, and prevent from injury. • Vertical turret design, makes the tool installation easier, due to the center of chuck is near by the operating door, • Lower location spindle design; the chips will not splash directly on the protective cover during machining.

 

Technical Data:

Item VFP-800A
PROCESSING CAPACITY (Max turning diameter) Ø660mm
PROCESSING CAPACITY (Max turning height) 320/340

(Adjustable turret)mm

PROCESSING CAPACITY (Max swing over bed) Ø850mm
PROCESSING CAPACITY(Standard wheel turning) 24inch
PROCESSING CAPACITY(Max wheel turning (optional)) 26inch
PROCESSING CAPACITY(Max wheel width) 12inch
PROCESSING CAPACITY(Workstation size)
PROCESSING CAPACITY(Max load)
STROKE (X-axis) 450mm
STROKE (Y-axis)
STROKE (Z-axis) 740mm
STROKE (B-axis)
STROKE (C-axis)
STROKE (Distance from spindle nose to workstation)
SPINDLE(RPM) 2500
SPINDLE(Nose type) A2-11
SPINDLE(Front end ID/OD) Ø130/Ø200mm
SPINDLE(Rear end ID/OD) Ø120/Ø180mm
SPINDLE(Motor type(?Coolant through spindle)) α40/6000i FANUC
SPINDLE(Motor type(?No Coolant through spindle))
SPINDLE(Motor power (continuous/30min) 37/45 kW
SPINDLE(Max torque) 306 Nm
TURRET(Tool number) Single turret-standard with hydraulic 12
/option available for servo 12. POS
TURRET(OD turning tool size) STANDARD□25 mm
TURRET(ID boring tool size) Ø50 mm
TURRET(Tool angle)
TURRET(Tighten screw)
TURRET(Max length)
TURRET(Max size)
TURRET(Max load)
TURRET(Tool switching time) 0.09/0.13 sec
SERVO MOTOR(X-axis) 4 kW
SERVO MOTOR(Y-axis)
SERVO MOTOR(Z-axis) 4 kW
RAPID TRAVERSES(X-axis) 16000 mm/min
RAPID TRAVERSES(Y-axis)
RAPID TRAVERSES(Z-axis) 20000 mm/min
BALLSCREW OD AND
THREAD(X-axis)
Ø36xP12 mm
BALLSCREW OD AND
THREAD(Y-axis)
BALLSCREW OD AND
THREAD(Z-axis)
Ø50xP12 mm
TRAVERSE RATE(Max turning traverse rate (X/Y/Z)) 10000 m/min
TURNING FLUID UNIT(Pump
(submersion type)[Tool cooling])
0.82 kW
TURNING FLUID UNIT(Pump
(submersion type))[Turning washing])
0.82 kW
TURNING FLUID UNIT(Pump
(Water tank volume))
250 Liters
HYDRAULIC UNIT(Pump) 1.5 W
HYDRAULIC UNIT(Oil tank volume) 39 Liters
LUBRICATION UNIT(Pump) 12 W
LUBRICATION UNIT(Oil tank volume) 4 Liters
MACHINE EXTERIOR(Width) 3120 mm
MACHINE EXTERIOR(Depth) 2200 mm
MACHINE EXTERIOR(Height) 3400 mm
MACHINE WEIGHT 8500 kg
POWER CAPACITY 70 kVA
CONTROL SYSTEM FANUC 0i-TF